Bowers & Wilkins Mono Subwoofer Amplifier 1000W - Black
Details
Purpose Built
The 2U rack mountable SA1000 is a Class D subwoofer amplifier based upon ICEpower technology. Designed purposely to drive the Bowers & Wilkins range of CT subwoofers, this amp is incredibly stable and powerful - allowing the subwoofer to produce fantastic amounts of tight, slamming bass.
Capable Of Running Dual Subs
The SA1000 allows for up to two of the same model subwoofers to be driven simultaneously.
1000 Watts On Tap
1000 watts of Class D power means your subwoofer can be powered exactly as it should, but it's the built-in sub equalisation that takes the SA1000 to the next level.
Adjustability To The Fore
With rotary volume adjustment, low-pass filter and phase adjustment - fundamental controls are at your fingertips. Then when it comes to fine-tuning, the SA1000 offers a 3-position bass extension switch, a movie / music EQ option, auto standby options and more.
Inputs Add To Flexibility
The SA1000 has dual RCA socket line-in and link outs, plus 1 x XLR line-in socket to ensure you can easily connect your amplifier.
Output Options
The SA1000 features a 3.5mm jack to trigger on / off, as well as a 12v trigger to select music or movie equalisation. On top of this, there's 2 x pairs of binding posts and a single Neutrik Speakeron 4-pole speaker socket. All of these outputs are topped off by 1 x XLR link out socket.
Rack Mountable
Whether you're choosing to rack mount the SA1000 or spec it in free-standing, it comes with both feet and rack ears to make your next installation tidy and straight forward.
Specifications
| Type | |
|---|---|
| Description | 1000W rack mountable subwoofer amplifier |
| Specifications | |
| Amplifier Power Output | 1000 watts |
| Input Impedance | 33kohm |
| Signal / Noise | 80dB |
| Amplifier Power Consumption - 1/8 Full Power | 300W |
| Amplifier Power Consumption - Idling | 34W |
| Amplifier Inputs | |
| Line In - RCA Phono | 2 x |
| Line In - XLR | 1 x |
| Link Out - RCA | 2 x |
| Amplifier Outputs | |
| Link Out - XLR | 1 x |
| On / Standby | 1 x 3.5mm 12V (overrides manual standby setting) |
| Equalisation (Movie / Music) | 1 x 3.5mm 12V |
| Neutrik Speakeron 4-Pole Speaker Socket | 1 x |
| Binding Posts | 2 x posts |
| Amplifier Functions - Front | |
| Rotary Volume | Line In |
| Rotary Low Pass Filter | (4th-order Linkwitz, 40Hz - 140Hz) |
| Low-Pass Filter Defeat | 2 position switch |
| Phase Position Switch | 0 - 180 degrees |
| Bass Extension | 3 position switch |
| Movie / Music EQ | 2 position switch |
| On / Auto / Standby | 3 position switch |
| Status LED | Yes |
| Fault LED | Yes |
| Amplifier Functions - Rear | |
| Model Select (CT SW10 / SW12 / SW15) | 3 position switch |
| Dimensions | |
| Height | 88.5mm |
| Height + Feet | 100mm |
| Width | 430mm |
| Depth | 322mm |
| Front Panel Height | 2U (88.1mm) |
| Net Weight | 6.45kg |
| Cosmetics | |
| Finish | Black |
Downloads
Ask a Question
Product Enquiry
Fill out the form below to get more information on this item and our friendly team will get back to you shortly.